Bulkhead Jacks

Bulkhead TRB jacks are designed to be installed into panels and backplanes. MilesTek offers a broad range of bulkhead jack solutions in both TRB and BNC varieties.
  1. Solder-Clamp Isolated Bulkhead Cable Jacks

    Isolated bulkhead jacks prevent the shielding on the connectors from interfacing with the panel they are fastened to. These jacks are fastened with conventional tools, and do not require any special crimping equipment.

  2. Non-Isolated Bulkhead Jack to Solder Pot

    Non-isolated bulkhead jacks connect the shielding of the connectors to the panel they are fastened to. Solder pot attachments on the rear of the connector accept 0.041" diameter conductors.

  3. Solder-Clamp Non-Isolated Bulkhead Cable Jacks

    Non-isolated bulkhead jacks connect the shielding of the connectors to the panel they are fastened to. These jacks are fastened with conventional tools, and do not require any special crimping equipment.

  4. Isolated Bulkhead Jack to Solder Pot

    Isolated bulkhead jacks prevent the shielding on the connectors from interfacing with the panel they are fastened to. Solder pot attachments on the rear of the connector accept 0.041" diameter conductors.