HDMI Over Single RG6 Coax

1

MilesTek’s HDMI over Coax Extender Set is a HDMI extender using a single coaxial cable as transmission media. This enables easy HDMI installation over a long distance. Full High-Resolution HDTV signals are supported up to a resolution of 1080P at a maximum distance of 150 meter. Installer will also have the ability to customize the length by using this extender set. The system will auto adjust feedback, equalization and amplifier, the user does not need to care about the length of the cable.

Part # 90-12024, HDMI Over Single Coax

Part # 90-12024, HDMI Over Single Coax

Features:

Extends high definition HDMI compliant devices up to 150 meters
Supports resolution up to 1080P
Works with HDMI 1.3c and HDCP compliant devices
Consumer Electronics Control (CEC)
Supports xvYCC function
Extends range of HDMI by equalizing signals
Easy to install and simple to use

Specifications:

Video amplifier speed: 10.2 Gbps
Video amplifier bandwidth: 340MHz
Up to 36bit color depth
Input video signal: 1.2 Volts p-p
Input DDC signal: 5 Volts p-p (TTL)
Connector I: HDMI type A 19-Pin female
Connector II: BNC type
Power supply: DC5V
Dimension: 117.5 x 68 x 26.5mm

Order Today: Part # 90-12024, HDMI Over SINGLE RG6/RG59 Coax Extender Set

New HDMI Devices

0

HDMI has been universally adopted by digital television manufacturers, driving connectivity requirements for a wide variety of source devices. At MilesTek, we take great pride in staying ahead of the trends and our HDMI solutions exemplify our product focus to meet your project specifications.

Whether you need to convert, switch, split, or extend your HDMI signal, MilesTek has the products to make your installation a success. Here’s a quick summary of the lastest products:

All to HDMI Converter/Scaler

  • “All to HDMI” converter/scaler: allows up to 9 different source devices to be up-converted to an HDMI display.
  • VGA to HDMI and Composite/S-Video to HDMI converters/scalers: these allow you to transmit your analog video signal onto a digital HDMI display.
  • 4×2 and 4×4 HDMI Matrix Switchers: combine video sharing and video splitting in one device. Distribute signal from any one of 4 sources to either display or all displays simultaneously.
  • 1×8 HDMI Splitter: allows distribution of one HDMI signal source out to up to eight HDTV displays.
  • HDMI over Single CAT5E/CAT6 transmitter/receiver set: supports and extends 1080p resolution up to 150 ft. from HDMI source. Allows savings on material costs by pulling just one run of Category UTP cable.

Check out our new HDMI devices today.

http://www.milestek.com/search.asp?skw=lkghdmi&image.x=0&image.y=0

New VGA Distribution Devices

0

We are pleased to announce our most robust offering of VGA distribution devices ever with the addition of new splitters/distribution amplifiers, switchers and matrix switchers. Highlights of our new products include the following:

VGA 2x4 Matrix Switcher
VGA 2×4 Matrix Switcher
  • 1×2 and 1×4 VGA splitters with 3.5 stereo audio allow you to broadcast video from one computer to two or four display monitors. These devices have a high bandwidth of 400MHz and support up to a 2048×1536 maximum resolution. 1×2 VGA and audio splitter over CAT5 device set distributes VGA from one computer source to a local display, plus 2 remote displays over a distance of 1,000 ft. away.
  • 2×1 and 4×1 VGA switchers allow two or four computers to share one video display with VGA port. These premium video selectors have a high bandwidth of 250MHz to maintain video integrity and provide high resolution up to 1920×1440.
  • 2×2 and 2×4 VGA matrix switchers, with 3.5 stereo audio or without, combine video sharing and video splitting in one device. Two computers can share two or four displays with VGA port (Video Share), or a computer can control the two or four video outputs and project to all monitors (Video Splitter). These devices also have a bandwidth of 250MHz and resolution up to 1920×1440.

Check out our new VGA devices today.

http://www.milestek.com/search.asp?skw=ABTVGA&image.x=0&image.y=0