HDMI OVER DUAL CAT5E/CAT6 PASSIVE BALUN EXTENDER SET - PART# 90-12034

The HDMI over Dual CAT5E/CAT6 balun set extends your HDMI video and audio signal up to 100 ft. from the HDTV source. This is a perfect for projector applications and situations in general where your HDMI compatible HDTV/display is located in a separate room or floor from where the HDMI source device is securely located. Running HDMI over just two runs of commonly used CAT6 cable results in even more material cost savings, while still providing greater signal distance and installation flexibility. Maximum resolution/bandwidth of 165MHz at 1080p/24Hz. Supports 3D at 1080p/24Hz!

Solid gauge CAT5E cable may be used, but for optimal performance and distance CAT6 is suggested for this passive device.

Tech Note: HDMI/VGA over CAT5E/CAT6 or Coax devices in general are designed and tested to work directly from the original Source device (laptop, BlueRay DVD, cable/satellite box, etc.) to the Display/HDTV. They should NOT be used in conjunction with connector adapters, AV receivers/signal processors, converters, switches or splitters/amplifiers between the original Source and Display device. Results can be no picture after a few days or weeks because of Receiver end being burnt out/damaged.

Features:

• Extends HDMI 1.3 signal up to 100 ft. @ 1080p/24Hz with CAT5E/CAT6 cable.
• Supports 3D @ 1080p/24Hz CAT5E/CAT6 cable.
• Slim compact design includes attached HDMI cable (11 inches) on transmitter and receiver, saving money on additional cables and setup time
• Includes transmitter & receiver balun
• Video and audio signals are transmitted digitally over CAT5E/CAT6 cable with zero signal loss
• Video Bandwidth: 1.65 MHz
• Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6)
• HDCP/DDC/CEC Compatibility
• No power supply required – but requires source that provides 5v DC HDMI signal (NOTE: some Blue-Ray DVD players do not supply 5v DC
• RoHS compliant