EZ RJ45 CONNECTORS CAT 6+ - PART# 10-23088 The new patented EZ-RJ45 Cat 6+ Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Crimp with the 40-40458 Crimp Tool...crimps and trims in one cycle.

FEATURES:
• For use in Cat 6 compliant data networks
• Category 6 performance per EIA/TIA B.2
• EZ to verify wire sequence
• Works with solid or stranded wire
• Faster terminations with reduced scrap
• FCC compliant, UL rated
• Simple one piece design...no bars or liners

TIPS and TRICKS
• Pull For Performance
  The closer the twists are to your contacts, the better the performance. So don't just push your twists, BUT push & pull. Take advantage of those extended conductors & watch your performance go up!
• T568A/T568B Wiring Chart
EZ RJ45 Connectors Instructions (.PDF) PLEASE NOTE - This product requires the use of one of the following boots:
• 10 99073 Cat6 Boot Blue 50 Pack
• 10 99074 Cat6 Boot Gray 50 Pack
• 10 99075 Cat6 Boot Green 50 Pack
• 10 99076 Cat6 Boot Yellow 50 Pack
• 10 99077 Cat6 Boot Black 50 Pack