HDMI OVER SINGLE CAT6 EXTENDER BALUN SET - PART# 90-12017
HDMI over Single CAT6 device set extends your HDMI video and audio signal up to 196 ft. from the HDTV source. This is a perfect and reliable solution for situations where your HDMI compatible HDTV needs to be located in maybe a separate room or floor from where the HDMI source device is securely located. Running HDMI over just one run of commonly used solid-gauge CAT6 bulk cable results in even more material cost savings, while still providing greater signal distance and installation flexibility. Tested to perform with satellite HDTV receivers and other higher MHz AV devices. Maximum resolution/bandwidth of 165MHz at 1080P.

Solid-gauge CAT5E cable may be used, but for optimal performance and distance CAT6 is suggested for this active device.


Tech Note: HDMI/VGA over CAT5E/CAT6 or Coax devices in general are designed and tested to work directly from the original Source device (laptop, BlueRay DVD, cable/satellite box, etc.) to the Display/HDTV. They should NOT be used in conjunction with connector adapters, AV receivers/signal processors, converters, switches or splitters/amplifiers between the original Source and Display device. Results can be no picture after a few days or weeks because of Receiver end being burnt out/damaged.

Features:

• Extends up to 1080p resolution 196 ft. (60M) with solid gauge CAT6 cable
• HDMI 1.3 and HDCP compliant
• Includes transmitter & receiver and power adaptors
• Video Bandwidth: 1.65 GHz
• Up to 24bit color depth
• Connectors: Standard HDMI 19 pin, RJ45
• HDCP/DDC/CEC Compatibility
• Power Supply: 5v 2A DC, Transmitter/Receiver
• Required Cables: Solid CAT6 Cables
• RoHS compliant
• 1-Year Warranty